1/4" NPT (140 psi).

The jet-air pocket dryer is a powerful airblower and a.o. ideal for drying waterborne paint of f.ex. spot repair, as the air circulation speeds up the evaporation of water in the paint.
The jet-air has a flat air jet with high pressure which can be directed very precisely on a specific part of the surface for manual cooling, drying and blowing.
For air regulator see art. 20076.

With the air regulator the pressure of the air jet can be accurately adjusted. By just turning the knob the exhaust air volume can be adjusted. Stepless.
Inlet/outlet ¼" NPT
Max. air inlet: 120 psi

Variable in height, very stable.

Stable, adjustable.

Essential for spraying waterbased products, for use in spray booths.

Mobile unit for UltraViolet paint drying UV-A. 3 cassettes, total 12 lamps, one lampe can be taken out of the unit for use as a hand model. Electronic timer, 220-240 V, 800 W, 50/60 Hz.

CE-approval, explosionproof, incl. 5 bags.

• In order to safely use the Distillation machine, consultation of the Distillation guide is obligatory.
• A distillation unit that can treat any type of solvent does not exist! It is therefore absolutely necessary to know in advance the chemical and physical properties of the products to be treated.
• This model has a Stainless Steel condenser. If you doubt which Condenser you need, please contact us.
• According to the legislation, the requirements for the installation and the placement of the machine are under the user’s responsibility.

CE-approval, explosionproof, incl. 5 bags.

• In order to safely use the Distillation machine, consultation of the Distillation guide is obligatory.
• A distillation unit that can treat any type of solvent does not exist! It is therefore absolutely necessary to know in advance the chemical and physical properties of the products to be treated.
• This model has a Stainless Steel Condenser. If you doubt which Condenser you must use, please contact us.
• According to the legislation, the requirements for the installation and the placement of the machine are under the user’s responsibility.

Rubber discs remove all types of glue, stickers, striping etc. Doesn't cause damage to the paint.

296 ml.

Blaster gun including 4 nozzles and dust bag.

Blast grit is designed for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2½ and SA-2, as well as SA-1, also called sweep blasting.

0,1 - 0,6 mm, dust-free, multi-usable.

Set of 4 pieces.

Incl. manual agitator, 2 regulators, twin hose of 7,5 m and caster wheels. For spraying larger volumes on larger surfaces. Pressure 60 psi, max. 80 psi. Outer tank: carbon steel, inner tank: aluminium. The pressure system is supplied without spray-gun.

For spray-gun: see art. 27660-xx, 27665-xx and also possible 27650-xx

Incl. regulator and twin hose of 1,2 m. For spraying larger volumes (paints and liquids) until 2 liter. Can be attached to a belt. Pressure 50 psi. Tank: aluminium. The pressure system is supplied without spray-gun.

For spray-gun: see art. 27660-xx, 27665-xx and also possible 27650-xx

Incl. manual agitator, 2 regulators and caster wheels. For spraying larger volumes on larger surfaces. Pressure 60 psi, max. 80 psi. Outer tank: carbon steel, inner tank: stainless steel. The pressure system is supplied without spray-gun and twin hose.

For spray-gun: see art. 27660-xx, 27665-xx and also possible 27650-xx

For twin hose: see art. 27679

Incl. manual agitator, 2 regulators and caster wheels. For spraying larger volumes on larger surfaces. Pressure 60 psi, max. 80 psi. Outer tank: carbon steel, inner tank: stainless steel. The pressure system is supplied without spray-gun and twin hose.

For spray-gun: see art. 27660-xx, 27665-xx and also possible 27650-xx

For twin hose: see art. 27679

For separating spot-welded or glued panels during repairs.

For easy removal of interior parts or trim. Packed in a handy storage bag.

Width 6 cm.