Producten

Holds up to 50 cups of each size.

Mixing cups are not included.

All-in-one paint cup system for mixing, spraying and storing paint. With screw-on lid. Without flexible liners. 

Kit: 50 cups 700 ml, 50 lids with strainer, 20 caps.

The QMP System is an All-in-One paint cup system for mixing, spraying and storing paint, without flexible liners. This system of cups without liners is a lot faster and more practical, as it consists of only 2 components: the cup, and the easy screw-on lid for super-quick assembly. No leakage. The lid provides a continuous material flow for excellent spraying result. The strainer is already integrated inside the lid (125µ or 190µ). The remaining paint can be stored in the cup, using the cap.

Painters save time while increasing their productivity and at the same time improve the quality of their work thanks to the continuous material flow. You save time and money, because this system also reduces the use of cleaners and solvents.

The cup has several functions: 
- as a mixing cup to prepare the paint
- as a gravity paint cup on the spray-gun
- storage cup for the remaining paint, using the closing cap

M16x1,5 female (Iwata W400/Protek/Sata NR92-95).

1/4"19 BSP male (Iwata WS/LS 400).

1/8"-28 BSP male (Iwata LPH 80).

M18x1.5 female (Sagola 4500 Xtreme).

M12x1.5 male (Sagola 3300).

TR20x4 (Satajet 3000-4000QCC/5000BRP/100BFRP).

M16x1.5 male (Sata Jet 2000-Jet B).

M10x1.0 male (Sata minijet/4400BRP). (For QCC: use adapter 8 and 9).

TR15x4 (Sata minijet 3000+4400BRP). (For QCC: use adapter 8 and 9).

3/8"-19 BSP male (Devilbiss GTI Pro/Pro Lite/Pri HVLP/Primer).

7/16"-14 UNC male (Devilbiss Sri/Sri Pro Lite/Micro).

Lightweight spray gun for paint, 2K paint, car paint, clear coat, primer and undercoat. High efficiency, allowing large surfaces to be sprayed in a relatively short time. For spraying thinner and water-based paint.

Working pressure: 0,7-2 bar (10-28 psi) 

Gun weight: 445 gr

Incl. cup. Stainless steel nozzle, needle and air cap.

27500-13 = 1,3 mm
27500-14 = 1,4 mm
27500-17 = 1,7 mm
27500-19 = 1,9 mm
27500-21 = 2,1 mm
27500-25 = 2,5 mm

Contents: stainless steel nozzle, needle and air cap

27501-13 = 1,3 mm
27501-14 = 1,4 mm
27501-17 = 1,7 mm
27501-19 = 1,9 mm
27501-21 = 2,1 mm
27501-25 = 2,5 mm

Conventional gun with an extremely fine atomization and provides a smooth, uniform layer when applying base coat, clear coat and single stage products.

Working pressure: 2-3 bar (30-43 psi)

Gun weight: 464 gr

Incl. cup. Stainless steel nozzle, needle and air cap.

27510-12 = 1,2 mm
27510-13 = 1,3 mm
27510-14 = 1,4 mm
27510-16 = 1,6 mm
27510-18 = 1,8 mm
27510-20 = 2,0 mm
27510-25 = 2,5 mm

Contents: stainless steel nozzle, needle and air cap

27511-12 = 1,2 mm
27511-13 = 1,3 mm
27511-14 = 1,4 mm
27511-16 = 1,6 mm
27511-18 = 1,8 mm
27511-20 = 2,0 mm
27511-25 = 2,5 mm

The 5000GH produces the finest atomization available resulting in smooth, uniform basecoat, clearcoat and single stage applications.

Working pressure: 1-2 bar (15-28 psi)

Gun weight: 464 gr

Incl. cup. Stainless steel nozzle, needle and air cap.

27515-12 = 1,2 mm
27515-13 = 1,3 mm
27515-14 = 1,4 mm
27515-16 = 1,6 mm
27515-18 = 1,8 mm
27515-20 = 2,0 mm
27515-25 = 2,5 mm

Contents: stainless steel nozzle, needle and air cap

27516-12 = 1,2 mm
27516-13 = 1,3 mm
27516-14 = 1,4 mm
27516-16 = 1,6 mm
27516-18 = 1,8 mm
27516-20 = 2,0 mm
27516-25 = 2,5 mm