Producten

For easy removal of door panelings.

Fits all popular brands of air nipples.

To clean and maintain your spray-gun.

Contents: 5 different sized brushes, needle, tooth picks, specially formulated lubricant (free of silicones) for spray-gun needles

For use with spray guns, removes oil, water and dirt from compressed air.

The blue filter material changes colour and becomes translucent when the filter needs to be replaced.

Analogue, Ø 40 mm, 0-11 bar, with 1/4" rear connection.

Suitable for guns with a 125 ml, 600 ml or 1000 ml cup. Keeps the gun stable and straight during filling. For mounting on the wall or on a workbench.

This holder has a strong magnet on the back to attach to a metal surface. Holds up to 4,5 kg of weight when placed on a solid flat metal surface.

Viscosity test range 10-60 seconds.

For cleaning and removal of paint, rust and dirt. 

Contents: 1 brass brush, 1 stainless steel brush for heavy duty scratching, 1 nylon brush for gentle clean-up work

To clean and maintain your spray-gun.

Contents: 6 needles + handle, several special brushes + handle, paint gun lube etc.

To clean and maintain your spray-gun.

Contents: 6 different needles, 11 different brushes

Scales: 2:1, 3:1, 4:1, 5:1, 7:1 and 10:1.

27213 = 400 cc
27214 = 650 cc
27215 = 1300 cc
27216 = 2230 cc

Scales: 2:1, 3:1, 4:1, 5:1, 6:1, 7:1, 8:1, 9:1, 10:1 and 12:1.

27213S = 400 cc
27214S = 650 cc
27215S = 1300 cc
27216S = 2230 cc

27223 = 400 cc
27224 = 650 cc
27225 = 1300 cc
27226 = 2230 cc

Holds up to 50 cups of each size.

Mixing cups are not included.

All-in-one paint cup system for mixing, spraying and storing paint. With screw-on lid. Without flexible liners. 

Kit: 50 cups 700 ml, 50 lids with strainer, 20 caps.

The QMP System is an All-in-One paint cup system for mixing, spraying and storing paint, without flexible liners. This system of cups without liners is a lot faster and more practical, as it consists of only 2 components: the cup, and the easy screw-on lid for super-quick assembly. No leakage. The lid provides a continuous material flow for excellent spraying result. The strainer is already integrated inside the lid (125µ or 190µ). The remaining paint can be stored in the cup, using the cap.

Painters save time while increasing their productivity and at the same time improve the quality of their work thanks to the continuous material flow. You save time and money, because this system also reduces the use of cleaners and solvents.

The cup has several functions: 
- as a mixing cup to prepare the paint
- as a gravity paint cup on the spray-gun
- storage cup for the remaining paint, using the closing cap